ThaiCool
ThaiCool Cold

Cold Chain Applications

Commercial freezers, walk-in cold rooms, refrigerated transport, reefer containers and HVAC surfaces need separate design checks. ThaiCool Cold positions each scenario independently instead of using one image or one coating assumption for all cold-chain work.

Modern commercial display freezer exterior coating construction scene
Construction scene: exterior panel coating
Modern commercial display freezer finished retail scene
Finished scene: glass-door freezer and island freezer
01 ThaiCool Cold

Commercial Display Freezer
商超玻璃门冷柜 / 岛柜 / 立式展示冷柜

  1. Problem: modern display freezers face heat gain around exterior side panels, backs, bases and service zones.
  2. ThaiCool Solution: apply a thin thermal coating only on suitable non-food-contact exterior surfaces after equipment review.
  3. Recommended Coating System: ThaiCool Cold detail coating for exterior panels, bases and adjacent enclosure surfaces.
  4. Expected Benefit: reduce local heat ingress direction and support stable operation; final effect requires equipment-specific testing.
Walk-in cold room interior for food seafood fruit and pharmaceutical storage
02 ThaiCool Cold

Walk-in Cold Room
食品、海鲜、水果、医药冷库

  1. Problem: panel joints, doors, service penetrations and local bridges can increase cold loss.
  2. ThaiCool Solution: use targeted coating on approved interior or exterior detail areas.
  3. Recommended Coating System: ThaiCool Cold with substrate preparation and hygiene-compatible finish pending validation.
  4. Expected Benefit: improve local cold retention direction; food or pharma use requires compliance review.
Refrigerated truck cold chain transport
03 ThaiCool Cold

Refrigerated Truck
冷藏货车

  1. Problem: vehicle body panels and door areas face solar exposure and repeated thermal cycling.
  2. ThaiCool Solution: reflective thermal coating on selected exterior panels or service areas.
  3. Recommended Coating System: ThaiCool Cold transport coating, primer and topcoat subject to vehicle substrate test.
  4. Expected Benefit: support heat-load reduction direction; route and operating data must verify results.
Reefer container interior handheld spray coating
04 ThaiCool Cold

Reefer Container
冷藏集装箱 / 集装箱内部喷涂

  1. Problem: container interiors include corners, ribs and repair zones that are hard to treat with bulky insulation.
  2. ThaiCool Solution: sprayable thin coating for selected interior surfaces after cargo-safety review.
  3. Recommended Coating System: surface cleaning, primer as needed and multi-pass ThaiCool Cold application.
  4. Expected Benefit: localized thermal barrier direction for complex areas; cargo-contact requirements must be confirmed.
White chilled water pipe and HVAC anti-condensation application
05 ThaiCool Cold

Chilled Water Pipe / HVAC
冷冻水管、风管、防结露

  1. Problem: chilled pipes, ducts, valves and supports carry condensation risk when surface temperature falls below dew point.
  2. ThaiCool Solution: thin aerogel coating around irregular shapes, joints and brackets where conventional wrapping is difficult.
  3. Recommended Coating System: ThaiCool Cold with detail treatment, vapor-control design and site dew-point check.
  4. Expected Benefit: condensation-risk reduction direction, subject to dew-point calculation and site testing.

Final values are subject to formulation, coating thickness, substrate, test method and third-party test results.

Contact via LINE